At a Glance
- Tasks: Verify product quality against engineering specs and identify areas for improvement.
- Company: Join Thompson Aero Seating, a leader in innovative seating solutions.
- Benefits: Enjoy competitive salary, annual bonus, 33 days leave, and health cash plan.
- Other info: Great career growth opportunities and a supportive team culture.
- Why this job: Make a real impact on product quality and safety in a dynamic environment.
- Qualifications: 1 year experience in Quality or Engineering; GCSEs in Maths and English required.
The predicted salary is between 35000 - 40000 £ per year.
Earnings
Salary discussed on application
The post holder will be responsible forfor independently verifying product conformity against engineering drawings, specifications and customer requirements using approved inspection methods and calibrated equipment.
Responsible for identifying and raising non-conformances and any quality related areas for improvement to the operations and quality teams to ensure a prompt resolution.
Support containment, root cause analysis, corrective actions and continuous improvement activities to prevent reoccurrence of quality issues.
Hour of work Monday-Friday 06:30-14:45.
Responsibilities
- Perform independent product verification checks to ensure parts, assemblies and finished products conform to engineering drawings and design specifications.
- Follows general inspection guidelines to conduct visual, cosmetic, dimensional, mechanical, and functional inspections on a wide variety of components, assemblies, equipment, systems, supplies and materials.
- Escalate quality concerns affecting product safety, compliance or customer requirements.
- Follow all health & safety procedures and report accidents and near misses.
- Provide direct feedback to the area’s Quality Assurance Engineer, Lead, Technical Lead and Operators after each formal inspection.
- Participate in Material Review Boards and authorise or reject proposed product dispositions (Use As-Is, Rework, Scrap and Return to Vendor).
- Offer recommendations to resolve recurring deficiencies found during inspections.
- Where necessary conduct first article inspection of parts, assemblies, equipment and tooling.
- Maintain necessary inspection logs and write inspection reports.
- Provide training/coaching to as required to address deficiencies identified during audits/inspection.
- Ensure all snags are entered into the appropriate snag workbooks for later analysis.
- To ensure seats are weighed, dimensionally verified and electrically tested.
- Participate in start of shift meetings to ensure clear understanding of planned activities and targets.
- Conduct daily product audits using the product audit checklist.
- Conduct daily Critical Control Point checks to verify conformity of product.
- Ensure inspection areas are always clean, tidy and FOD free.
- Report any/all unapproved rework to Quality Assurance Engineer and Assembly/Manufacturing Manager,
- Inspect kitted parts supplied to line to ensure they are fit for use.
- Liaise with Manufacturing Engineering to ensure there is a valid reason for any left-over parts after the completion of a build stage.
- Validate conformity of any surplus parts for return to stores.
- Ensure all paperwork for product is correctly controlled during build and inspection.
- Reward
- Annual bonus (linked to company performance)
- 33 days annual leave (Increase after 5 years' service)
- Health cash plan
- Contributory Salary Sacrifice Pension Scheme
- Holiday Purchase Scheme - Salary Sacrifice
- Cycle to Work Scheme
- Competitive enhanced Maternity and Paternity pay
- IVF & Assisted Conception Policy
- Women in Business - Corporate Member
- Service Awards
- Local charity /sponsorship activities
- Dedicated employee parking
- Discounted Gym membership
- Learning and development opportunities
Requirements
- Minimum 1 years’ experience in a Quality, Manufacturing or Engineering environment.
- Educated to a minimum of GCSE Level, with Grade C or above in Maths and English and/ or a recognised engineering apprenticeship.
- Working knowledge of a Quality Management System (QMS).
- Proficient in Microsoft Word and Excel.
- Demonstrable ability to accurately read and interpret engineering drawings, dimensions, tolerances and specifications.
- Experience using calibrated inspection equipment (e. g. verniers, micrometers).
- Experience identifying, documenting and communicating non-conformances.
We reserve theright to enhance criteria on shortlisting.
Thompson Aero Seating is an Equal Opportunities employer.
The closing date for applications is the 9th August 2026 at 17:00.
#J-18808-Ljbffr
Quality Inspector in Craigavon employer: Thompson Aero
Thompson Aero Seating is an exceptional employer that values its skilled Machinists by offering a supportive work culture and numerous benefits, including an annual bonus linked to company performance and a comprehensive health cash plan. Located in a dynamic environment, employees enjoy opportunities for professional growth through learning and development initiatives, while also benefiting from generous leave policies and various salary sacrifice schemes that promote work-life balance and well-being.
StudySmarter Expert Advice🤫
We think this is how you could land Quality Inspector in Craigavon
✨Join Local Manufacturing Groups
Getting involved in local manufacturing groups or associations can seriously boost your visibility. These groups often have insider info on job openings and networking events, plus they help you connect with like-minded folks in the industry. Check out what's happening in your area!
✨Show Off Your Skills in Practical Spaces
Consider participating in workshops or open days at manufacturing companies. It's a great way to show off your hands-on skills in a real-world environment and can sometimes lead to job offers right on the spot. Keep an eye on announcements from local manufacturers for these opportunities!
✨Leverage the Power of Internships
While you're looking for full-time positions, don't underestimate the power of internships! Even if you don't see a direct role, securing an internship at a company can open doors to future jobs. Many manufacturing firms prefer to hire from their intern pool, so it's definitely worth considering.
✨Apply Directly Through Company Websites
When you find a role at a company you love, like Thompson Aero, apply directly on their website. This way, you’re more likely to be noticed by the hiring team. Plus, showing that you took the time to seek out their application process highlights your genuine interest in the firm!
We think you need these skills to ace Quality Inspector in Craigavon
Some tips for your application 🫡
Showcase Your Technical Skills:In the manufacturing-production sector, it's crucial to highlight your technical skills and experience. Make sure your CV features any relevant qualifications, such as certifications in machinery operation or production management, and don’t forget about any specific systems or software you’re familiar with. This can really set you apart!
Emphasise Teamwork and Communication:Working in manufacturing often means being part of a larger team. Highlight your experience in collaborative projects or environments where communication was key. Maybe you have experience with lean manufacturing principles? Talk about how you worked with your team to improve productivity and maintain quality.
Tailor Your Cover Letter to the Company:Don’t just recycle an old cover letter! Take the time to tailor your cover letter to Thompson Aero specifically. Mention what excites you about their production processes or products, and how your previous experiences can contribute to their goals. We want to see your enthusiasm for the role!
Use Concrete Examples of Your Achievements:When detailing your work experience, include measurable achievements that can demonstrate your impact. Whether it’s improving efficiency by a certain percentage or successfully leading a project, these specifics can make a huge difference. Numbers speak volumes in the manufacturing world!
How to prepare for a job interview at Thompson Aero
✨Know Your Manufacturing Processes
Before you walk into the interview with Thompson Aero, brush up on the specific manufacturing processes relevant to the role. Understanding lean manufacturing principles or quality control techniques could give you a solid edge to discuss how you’d fit into their operations.
✨Technical Questions Are Key
Be prepared for technical questions around machinery, production scheduling, or materials handling. Make sure you can confidently explain how you've dealt with these in past experiences or internships. Knowing industry-specific software could also be a big plus!
✨Showcase Your Problem-Solving Skills
Manufacturing environments often focus on continuous improvement. Be ready to discuss specific instances where you’ve solved a production issue or implemented a process improvement. It’s all about demonstrating your analytical thinking and hands-on approach.
✨Align Your Values with Quality and Safety
In a full-time role, companies like Thompson Aero value commitment to quality and safety. Be prepared to discuss how you prioritise these factors in your work. It’s about showing that you’re not just looking for a job, but that you genuinely care about contributing positively to their production environment.
