Find a job 
Featured Companies 
Featured Universities 
For Companies At a Glance
- Tasks: Weld and fabricate high-quality products using advanced techniques in a dynamic environment.
- Company: Join a leading company in the railway industry focused on safety and innovation.
- Benefits: Competitive pay, training opportunities, and a safe work environment.
- Why this job: Make a real impact by working on critical projects that ensure safety and quality.
- Qualifications: ISO 9606-1 certification and 5 years of welding experience required.
- Other info: Opportunity for career growth and skill development in a supportive team.
The predicted salary is between 30000 - 42000 £ per year.
JOB PURPOSE + SCOPE OF THE ROLE
- Performing fabrication & welding of high integrity products certified to Railway standards of EN 15085 and various high safety integrity fabrications by TIG and MAG processes by manual and mechanised methods to regular production schedules and assist in development and qualification of new products.
- Setting, programming and operation of fully mechanised systems and in accordance to engineering drawings, written welding procedure specifications and verbal instructions.
- Responsible for dimensional & self-visual inspection of all deposited welds to meet international ISO 5817 quality acceptance standards.
KEY RESPONSIBILITIES + DUTIES
- Achieve and continuously maintain production welding certification to ISO 9606-1 and ISO 14732 standards in MAG and TIG processes through regular scheduled testing and on demand as required to demonstrate welding proficiency in various joints as applicable to production demands.
- Read and interpret engineering welding fabrication drawings, symbols, geometric tolerances. Fit-up and fully weld various fabricated assemblies in accordance with drawings using a mix of jigs and fixtures and manual setup techniques.
- Volume and small batch production welding of a variety of sheet, plate and tubular Butt and Fillet welded assemblies typically ranging between 2mm to approximately 75mm thickness in carbon and stainless-steel in plate and tube forms.
- Setting and operating fully mechanised MAG welding lathe for circumferential joints on various high criticality tube weld joints.
- Understanding and working to written welding procedure specifications, work instructions, acceptance standards and following verbal directions.
- 100% visual inspection of all production weld deposits in accordance with international standards.
- Use of various measurement equipment to inspect interim and final tolerances of assemblies in accordance to drawing.
- To perform production leak testing and any supplementary production inspections, repairs or assist in other assigned duties as necessary due to operational demands.
- Maintaining and monitoring welding and ancillary equipment and assist in troubleshooting functional issues on a regular / daily basis.
- Always maintain a safe and tidy work environment and safe performance of operations. Adhere to all Health & Safety regulations and company standards as required.
- Use of hand, power and air tools, thermal cutting/heating equipment and cranes/lifting equipment.
- Complete records of production and quality documentation as required.
- Use of computer to access drawings and instructions.
MINIMUM QUALIFICATION (S) / EXPERIENCE REQUIREMENTS FOR THE ROLE
Essential:
- ISO 9606-1 certification in MAG & TIG process Butt & Fillet weld in various positions and product forms or equivalent.
Advantageous:
- Completion of a welding/fabrication or a relevant apprenticeship/training programme or qualification.
- Visual weld inspection training or qualification.
- ISO 14732 certification for mechanised welding.
- ISO 9606-1 certification in TIG process Butt & Fillet weld in various positions and product forms.
Experience:
Essential:
- Person requires a minimum of 5 years’ experience in the field of fabrication and welding with the ability to read and interpret engineering drawings, procedure specifications and perform welding inspections.
- Specific history of welding volume and/or specialist fabrication by MAG process on carbon steels in Butt and Fillet joints in a range of approximately 2mm to 75mm and plates for comparable high-quality and safety critical applications.
Advantageous:
- Experience in welding of stainless-steel fabrications.
- TIG welding of fabricated assemblies.
- TIG welding of pipework, low or high pressure.
Production Welder Fabricator in Exhall employer: TA Savery & Co Limited
Contact Detail:
TA Savery & Co Limited Recruiting Team
StudySmarter Expert Advice 🤫
We think this is how you could land Production Welder Fabricator in Exhall
✨Tip Number 1
Get your hands dirty! If you can, visit the company or similar workplaces to see their operations in action. This not only shows your interest but also helps you understand their processes better, which you can mention in interviews.
✨Tip Number 2
Network like a pro! Connect with current employees on LinkedIn or attend industry events. A friendly chat can sometimes lead to insider info about job openings or even a referral, which can give you a leg up in the application process.
✨Tip Number 3
Practice makes perfect! Brush up on your welding skills and be ready to demonstrate them. Consider setting up a mock interview where you can showcase your technical knowledge and problem-solving abilities related to welding and fabrication.
✨Tip Number 4
Don’t forget to apply through our website! It’s the best way to ensure your application gets seen by the right people. Plus, it shows you’re serious about joining our team and are familiar with our processes.
We think you need these skills to ace Production Welder Fabricator in Exhall
Some tips for your application 🫡
Show Off Your Skills: Make sure to highlight your welding certifications and experience in your application. We want to see how your skills match up with the job requirements, so don’t hold back on showcasing your expertise in MAG and TIG processes!
Read the Job Description Carefully: Take a good look at the job description and tailor your application accordingly. We’re looking for specific experiences and qualifications, so make sure you address those directly in your cover letter and CV.
Be Clear and Concise: When writing your application, keep it clear and to the point. We appreciate straightforward communication, so avoid fluff and focus on what makes you the best fit for the role.
Apply Through Our Website: Don’t forget to submit your application through our website! It’s the easiest way for us to receive your details and ensures you’re considered for the role. We can’t wait to hear from you!
How to prepare for a job interview at TA Savery & Co Limited
✨Know Your Standards
Make sure you’re familiar with the relevant welding standards like ISO 9606-1 and ISO 14732. Brush up on the specifics of EN 15085 too, as it’s crucial for railway standards. Being able to discuss these in detail will show your expertise and commitment to quality.
✨Master the Drawings
Before the interview, practice reading and interpreting engineering drawings and welding symbols. You might be asked to explain how you would approach a specific fabrication task based on a drawing, so being prepared will give you an edge.
✨Showcase Your Experience
Be ready to share specific examples from your past work that highlight your experience with MAG and TIG processes. Discuss any challenges you faced and how you overcame them, especially in high-criticality environments. This will demonstrate your problem-solving skills and hands-on experience.
✨Safety First!
Emphasise your commitment to maintaining a safe work environment. Be prepared to discuss how you adhere to health and safety regulations and how you ensure safety during operations. This is vital in the welding industry, and showing that you prioritise safety will impress your interviewers.
