At a Glance
- Tasks: Lead and train junior NDT inspectors while performing inspections on ships and submarines.
- Company: Join IMIA, the leading marine surface preparation contractor in the U.S.
- Benefits: Enjoy health benefits, 401(k), travel allowances, and an Employee Assistance Program.
- Other info: Dynamic work environment with opportunities for growth and development.
- Why this job: Make a real impact in quality assurance and develop your leadership skills.
- Qualifications: Must be a qualified NDT Level II inspector with 5+ years of experience.
The predicted salary is between 40000 - 50000 £ per year.
Lead NDT Inspector will direct and provide supervisory oversight of junior Level II NDT inspectors, aiding them with technical guidance and on-the-job training as necessary. The lead NDT inspector will also perform VT, UT, MT and PT inspections on surface ship and submarine structure/piping. Required to perform miscellaneous tasks, as assigned by his or her NDT Examiner.
Provide advanced training to both junior and journeyman NDT inspectors for NDT inspections as well as other typical duties such as Test and Inspection Plan management. Junior NDT inspectors in the region will report to Lead NDT. Act as deck plate subject matter expert on NDT for various projects. Review technical work instructions for accuracy and completeness prior to assigning NDT tasks. Assist in resolving quality issues in region. Identify areas of improvement for NDT and Quality Assurance procedures and, as applicable, review NDT inspectors' Objective Quality Evidence prior to submittal. Ensure attention to detail is paramount amongst all inspectors. Perform periodic surveillances on trade workers (welders/fitters) as well as NDT inspectors to establish trends and combat non-conformance. Perform most complicated VT, MT, PT and UT processes with an emphasis on training junior inspectors. Perform basic VT, MT, PT and UT inspections as workload demands. Act as liaison between Test Examiners and projects as needed. Ensure projects have NDT resources needed. Ensure NDT equipment on job sites is in good working order and calibrated as required. Perform other related duties as assigned.
Essential Duties & Responsibilities
- Provide advanced training to both junior and journeyman NDT inspectors for NDT inspections as well as other typical duties such as Test and Inspection Plan management.
- Act as deck plate subject matter expert on NDT for various projects.
- Review technical work instructions for accuracy and completeness prior to assigning NDT tasks.
- Assist in resolving quality issues in region.
- Identify areas of improvement for NDT and Quality Assurance procedures.
- Ensure attention to detail is paramount amongst all inspectors.
- Perform periodic surveillances on trade workers (welders/fitters) as well as NDT inspectors.
- Perform most complicated VT, MT, PT, and UT processes with an emphasis on training junior inspectors.
- Perform basic VT, MT, PT and UT inspections as workload demands.
- Act as liaison between Test Examiners and projects as needed.
- Ensure projects have NDT resources needed.
- Ensure NDT equipment on job sites is in good working order and calibrated as required.
- Perform other related duties as assigned.
Supervisory Responsibility
Direction and oversight of fellow NDT Inspectors. Must be able to deliver simple to complex instructions to inspectors in a manner that they can follow accurately.
Knowledge, Skills, Abilities & Attributes
- Have knowledge of welding joint design and joint fit-up requirements.
- Ability to follow instructions given both verbally and in written form.
- Willingness to learn and work to the best of his/her abilities and have a dependable work ethic.
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
- Familiarity with the metric system.
Education And Experience
- High school graduate, or GED.
- Qualified NDT Level II inspector IAW NAVSEA requirements in Tech Pub 271.
- Experience with SMAW, GTAW and GMAW welding highly preferred.
- 5+ years of NAVSEA NDT certification in the following methods: Visual testing, liquid penetrant testing, magnetic particle testing, ultrasonic thickness testing and ultrasonic shearwave testing.
- Previous leadership or management experience preferred but not required.
Working Conditions / Physical Requirements
Regularly required to walk; frequently required to stand, stoop, kneel, crouch, climb, balance, or crawl at various heights and in confined spaces; occasionally required to sit; required to reach with hands and arms, use hands to feel, grip or handle; regularly required to safely lift and/or move up to 50 pounds; required use of vision to see up close, distance, and peripherally, as well as depth perception and ability to adjust focus in low light conditions. May be required to wear a respirator to safely perform assigned tasks. Ability to successfully pass near vision acuity and color discrimination examinations, with or without the use of corrective lenses (glasses or contact lenses), is required. Must be able to deliver simple to complex instructions to inspectors in a manner that they can follow accurately. Willing to work 40+ hours a week.
Reasonable Accommodations
Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.
About the Organization
IMIA, LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full-time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion.
Benefits
- Health
- Dental
- Vision
- Life
- LTD
- Accident
- Critical Illness
- 401(k)
- Employee Assistance Program
Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Travel Allowance Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work.
EEO Statement
IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training.
Lead NDT Inspector in Cornholme employer: IMIA, LLC
IMIA, LLC is an exceptional employer for those seeking a rewarding career as a Lead NDT Inspector, offering a supportive work culture that prioritises employee development through advanced training and mentorship opportunities. With comprehensive benefits including health, dental, and a robust 401(k) plan, employees can thrive both personally and professionally while contributing to critical marine preservation projects across the U.S. ports.
StudySmarter Expert Advice🤫
We think this is how you could land Lead NDT Inspector in Cornholme
✨Join Engineering Meetups!
Get yourself along to local engineering meetups or tech conferences. These are great places to connect with like-minded folks and industry leaders who might just have a lead on that full-time Lead NDT Inspector role you’re after at IMIA, LLC.
✨Show Off Your Projects!
Don’t be shy about showcasing your engineering projects. Whether it’s a funky app, a mechanical design, or a complex algorithm, having a solid portfolio on platforms like GitHub can really make you stand out. Plus, it gives potential employers at IMIA, LLC a taste of what you can bring to the table!
✨Engage with Online Communities
Dive into engineering forums and online communities, like Reddit or specific engineering Discord channels. Sharing your insights, asking questions, and being active can help you build connections that might lead to job opportunities at IMIA, LLC.
✨Apply Through Company Websites
When you spot a role like Lead NDT Inspector at IMIA, LLC, apply directly through their website. Often, this can show your genuine interest in the company and you might just get noticed quicker than via typical job boards.
We think you need these skills to ace Lead NDT Inspector in Cornholme
Some tips for your application 🫡
Showcase Your Technical Expertise:When applying for an engineering role like Lead NDT Inspector, it’s essential to highlight your technical skills. Include any relevant software or tools you're proficient in on your CV—think CAD software, simulation tools, or programming languages. Don't skimp on any engineering projects you've worked on that demonstrate your ability to solve complex problems.
Focus on Results and Impact:In the engineering world, we love numbers and real-world impact. Quantify your achievements wherever possible—like reducing costs by a certain percentage, improving efficiency, or successfully completing a project ahead of schedule. This gives your future employers at IMIA, LLC a clear picture of the value you can bring.
Craft a Compelling Cover Letter:Use your cover letter to express your passion for engineering and explain why you’re drawn to IMIA, LLC specifically. Share what aspects of their work excite you and how your values align with theirs. This is your chance to show a bit of personality while keeping it professional!
Include Relevant Certifications:If you have any engineering certifications, especially ones that are recognised in your field, make sure to feature them prominently on your CV. They demonstrate not just your knowledge, but also your commitment to professional development, which is something we at StudySmarter value highly.
How to prepare for a job interview at IMIA, LLC
✨Brush Up on Core Engineering Principles
Before heading into the interview with IMIA, LLC, make sure you're solid on the fundamental engineering principles relevant to the role. Be ready to discuss concepts such as thermodynamics, fluid mechanics, or structural analysis, depending on the specifics mentioned in the job description. Don’t skip any hands-on projects or coursework; these can be excellent talking points!
✨Show Off Your Problem-Solving Skills
Expect technical questions or case studies during your interview—after all, engineering is all about solving problems! Prepare a few examples of how you've tackled engineering challenges in the past, whether at university or in any practical experience. Practising with mock technical interviews can really help you articulate your thought process and solutions.
✨Relate Your Experience to the Role
In a full-time role, employers like IMIA, LLC want to see that you can adapt and grow within their team. Be ready to discuss how your previous internships, projects, or studies relate directly to the work you'll be doing. Highlight specific experiences that showcase your collaborative skills and how you've successfully worked within a team environment.
✨Know Your Tools and Software
Most engineering roles require familiarity with specific tools and software. Prepare to talk about your proficiency with programmes like AutoCAD, MATLAB, or SolidWorks if they’re relevant to the role. Even better, have examples of projects where you’ve used these tools, as it'll demonstrate your hands-on experience and readiness for the job.