Find a job 
Featured Companies 
Featured Universities 
For Companies At a Glance
- Tasks: Maintain and repair electrical, hydraulic, and pneumatic systems on machinery and robotics.
- Company: Join IAC Group, a global leader in automotive components with over 17,000 employees worldwide.
- Benefits: Enjoy a dynamic work environment with opportunities for continuous improvement and skill development.
- Why this job: Be part of a team that drives innovation in the automotive industry while enhancing your engineering skills.
- Qualifications: NVQ level 3 in Mechanical/Electrical Engineering and experience in high-volume automotive environments required.
- Other info: Flexibility for shift work and emergency call-outs is essential.
The predicted salary is between 30000 - 42000 £ per year.
International Automotive Components Group (IAC Group) is a leading global supplier of automotive components and systems, including interior and exterior trim. Our product portfolio spans across automotive components and systems, including instrument panels, console systems, door panels, headliners, and overhead systems to automakers around the world. The company has approximately 60 total locations and employs more than 17,000 people globally.
Role Responsibilities:
- Maintenance of all electrical, hydraulic, and pneumatic systems on all machinery, robotics, lasers, and ancillary material handling equipment to maintain efficiency and utilization of 95%.
- Assist in implementing and maintaining proactive maintenance systems for PPM and TPM.
- Route cause analysis to identify issues and provide first-time fixes to reduce downtime.
- Fault finding and repair on electrical issues and mechanical faults on hydraulics and pneumatics.
- Effective and timely response to all breakdowns.
- Adhere to all company HSE policies and procedures at all times.
- Comply with LOTO procedures at all times.
- Recommend improvements to equipment and processes to enhance quality and productivity.
- Perform safety checks on all machines.
- Perform routine preventative maintenance checks on all production equipment and machinery.
- Replace and repair parts on machines such as bearings, filters, wiring, valves, gauges, and switches.
- Adjust functional parts of devices and control instruments.
- Replace electrical parts and equipment as required.
- Observe and listen to mechanical devices in operation to locate causes of trouble.
- Dismantle machinery to gain access to and remove defective parts.
- Inspect used parts to determine changes in dimensional requirements.
- Repair or replace defective parts.
- Lubricate and clean parts as required.
- Start machinery to test their performance.
- Implement continuous improvement activities to assist cost down at all times.
- Any other projects or tasks assigned to you by management as required.
- Shift working and flexibility essential.
Qualifications and Experience:
- NVQ level 3 in Mechanical / Electrical Engineering.
- Must have previous experience working in a high volume, high class, automotive environment.
- Experience of working with injection molding machines.
- Experience in practical mechanical / electrical engineering.
- Demonstrate effective time management.
- Experienced in Robotics, specifically ABB 6 Axis robot / Fanuc and PLC Programming.
- Knowledge of Quality systems such as IATF16949 / ISO 9000 a distinct advantage.
- Ability to communicate effectively at all levels.
- Team player - flexible on colleague cover and working outside normal hours.
- Prepared to accommodate emergency call out (within reasonable parameters).
- Understanding of IATF16949/ISO9001 Quality standards.
Maintenance Engineer employer: IAC Group
Contact Detail:
IAC Group Recruiting Team
StudySmarter Expert Advice 🤫
We think this is how you could land Maintenance Engineer
✨Tip Number 1
Familiarise yourself with the specific machinery and systems mentioned in the job description, such as injection moulding machines and ABB/Fanuc robots. This knowledge will not only help you during interviews but also demonstrate your genuine interest in the role.
✨Tip Number 2
Network with current or former employees of IAC Group on platforms like LinkedIn. They can provide valuable insights into the company culture and expectations, which can give you an edge during the interview process.
✨Tip Number 3
Prepare to discuss your experience with proactive maintenance systems and how you've implemented improvements in past roles. Be ready to share specific examples that highlight your problem-solving skills and ability to reduce downtime.
✨Tip Number 4
Brush up on your knowledge of quality systems like IATF16949 and ISO 9000. Being able to speak confidently about these standards will show that you understand the importance of quality in the automotive industry and are committed to maintaining high standards.
We think you need these skills to ace Maintenance Engineer
Some tips for your application 🫡
Tailor Your CV: Make sure your CV highlights relevant experience in mechanical and electrical engineering, particularly in high-volume automotive environments. Emphasise your familiarity with injection moulding machines and robotics, as these are crucial for the role.
Craft a Strong Cover Letter: In your cover letter, express your enthusiasm for the Maintenance Engineer position at IAC Group. Mention specific examples of how you've implemented proactive maintenance systems or improved equipment processes in previous roles.
Highlight Relevant Qualifications: Clearly state your NVQ level 3 in Mechanical/Electrical Engineering and any other relevant certifications. If you have experience with quality systems like IATF16949 or ISO 9000, make sure to include that as well.
Showcase Problem-Solving Skills: Provide examples in your application of how you've successfully conducted root cause analysis and resolved mechanical or electrical issues. This will demonstrate your ability to reduce downtime and improve efficiency, which is key for this role.
How to prepare for a job interview at IAC Group
✨Showcase Your Technical Skills
Make sure to highlight your experience with electrical, hydraulic, and pneumatic systems during the interview. Be prepared to discuss specific examples of how you've maintained machinery and handled breakdowns in previous roles.
✨Demonstrate Problem-Solving Abilities
Employers will be keen to see your approach to root cause analysis and first-time fixes. Prepare to share instances where you successfully identified issues and implemented effective solutions to reduce downtime.
✨Emphasise Safety Awareness
Since adherence to HSE policies and LOTO procedures is crucial, be ready to discuss your understanding of these practices. Share any experiences where you prioritised safety in your maintenance work.
✨Communicate Your Team Spirit
As a Maintenance Engineer, being a team player is essential. Talk about your flexibility in covering for colleagues and your willingness to work outside normal hours when necessary. This shows that you're committed to the team's success.
