Sheet Metal & Plate Fabricator Welders TIG, MIG in Brome

Job Overview

Fulcrum Engineering & Technical are acting as an Employment Business on behalf of our Clients.

We are recruiting personnel at all levels and covering similar Welding Fabrication roles depending on applicants skill sets & experience. Fabricator Welders will be more involved with fabrication work plus higher spec welding work with TIG.

Sheet Metal Fabricator Welders & Welder Fabs working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working mainly on welding sheet metal 1.5 – 4 mm stainless or mild steel, ali, mild steel angle, box ideally able to weld pipe & tube with TIG or MIG.

Also semi skilled applicants can apply if they can cover most of the work depending on their skill set.

Qualifications

Quals/Skills = Able to fabricate & weld with TIG mainly & some MIG depending on skills levels, or weld with MIG and some TIG. Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork. Ideally – Use Tube Bending Machine & Press Brake & other Work Shop Machinery & Tools.

Hours & Contract

Hours = 0700 to 1630 or 1730 40 to 50 hours Mon to Fri as required. Also 0600 or 0700 to 1330 Sat as required. Term = Temp Contract 6 to 13 weeks & Temp to Perm 13 weeks with good chance of perm role after 13 full weeks. Perm = May be some direct perm roles if the applicant is working and has to give notice. Pay Temp Contract = £19.50 + per hr up to 60 hrs depending on Skills/Quals.