Gas Heating And Air Conditioning Engineer in Guildford

Gas Boiler Breakdown & Installation Engineer

Company

FIRST Plumbing & Heating-UK Ltd

Position

Gas Boiler Breakdown & Installation Engineer

Employment

Full-time

Location

Field-based
About the Role FIRST Plumbing & Heating-UK Ltd is looking for an experienced

Gas Boiler Breakdown & Installation Engineer with excellent diagnostic and fault-finding skills.

The main focus of the role is attending boiler breakdowns, accurately diagnosing faults and completing safe, effective repairs.

The engineer will also carry out boiler servicing, central heating repairs and boiler installations when required.

We are looking for a genuine fault-finding engineer who understands how boilers and heating systems operate, rather than someone who simply replaces parts until a fault disappears.

• Main Responsibilities Boiler Breakdowns & Fault Finding You will be expected to:
• Attend domestic gas boiler breakdowns.
• Diagnose faults accurately and methodically.
• Carry out electrical and mechanical fault finding.
• Diagnose intermittent and recurring boiler faults.
• Identify failed components and, where possible, establish why they have failed.
• Repair boilers safely and efficiently.
• Identify required replacement parts accurately.
• Test appliance operation following repairs.
• Check relevant safety devices and controls.
• Diagnose ignition and flame-detection faults.
• Diagnose fans, gas valves, PCBs, pumps, sensors and controls.
• Investigate system pressure problems.
• Diagnose expansion vessel and PRV faults.
• Investigate poor heating and hot-water performance.
• Diagnose circulation problems, airlocks and restrictions.
• Diagnose pumps, motorised valves, thermostats, programmers and zone controls.
• Check flues and condensate arrangements.
• Carry out combustion analysis and gas-rate checks where required.
• Carry out appropriate gas-safety checks.

Boiler Servicing You will also carry out boiler servicing, including

• Servicing appliances in accordance with manufacturer instructions.
• Combustion analysis.
• Checking safety devices.
• Inspecting relevant seals and components.
• Checking flue integrity and termination.
• Checking condensate arrangements.
• Checking system pressure and expansion arrangements.
• Testing heating controls.
• Identifying existing or developing faults.
• Recording readings and findings accurately.
• Reporting recommended remedial work.

Boiler Installation The successful candidate must have boiler installation experience and should be confident carrying out:

• Combi boiler replacements.
• System and heat-only boiler replacements where competent.
• Boiler relocations where appropriate.
• Flue installation and alterations.
• Condensate installation.
• Gas pipework alterations and upgrades.
• Heating flow and return alterations.
• Hot and cold-water pipework.
• Magnetic filter installation.
• Heating control installation.
• System flushing and chemical treatment.
• Filling, testing and commissioning.
• Completion of appropriate commissioning documentation.

Installation work must be completed to a professional standard.

Pipework should be appropriately routed, clipped and supported, and boilers must be installed and commissioned in accordance with applicable requirements and manufacturer instructions.

If an installation differs significantly from the agreed scope, the engineer must contact the office before carrying out significant additional work.

• Central Heating Experience The engineer should be confident diagnosing and repairing:
• Radiator problems.
• Poor circulation.
• Airlocks.
• Pump faults.
• Motorised valves.
• Zone controls.
• Thermostatic radiator valves.
• System pressure faults.
• Expansion vessels.
• Heating system leaks.
• Heating controls.
• Associated heating pipework.

Gas Safety Gas safety is non-negotiable.

The engineer must

• Hold current Gas Safe qualifications appropriate to the work undertaken.
• Hold relevant domestic ACS qualifications.
• Work in accordance with applicable gas-safety legislation, standards and manufacturer instructions.
• Correctly identify and deal with unsafe situations.
• Complete appropriate warning notices and documentation where required.
• Never leave an appliance operating where it would be unsafe.
• Never undertake gas work outside their qualifications or competence.
• Record safety-related findings accurately.
• Escalate serious safety concerns immediately.

Customer Service Our engineers represent FIRST Plumbing & Heating-UK Ltd in customers' homes and businesses.

You must

• Be polite, professional and presentable.
• Communicate clearly with customers.
• Explain faults in straightforward language.
• Protect customers' property while working.
• Use appropriate floor and work-area protection.
• Keep work areas clean and tidy.
• Treat customers and their property with respect.
• Explain when further work is required.
• Avoid promising prices, parts availability or return dates unless confirmed.
• Refer additional chargeable work through the company.

Job Reporting Accurate job reporting is an essential part of the position.

Engineers must record appropriate

• Job notes.
• Fault diagnosis.
• Work completed.
• Parts used.
• Parts required.
• Boiler make and model.
• Serial numbers where relevant.
• Combustion readings where applicable.
• Gas-safety findings.
• Photographs.
• Recommendations.
• Follow-on work requirements.

The office should receive enough information to order parts, prepare quotations or arrange follow-on work without another visit simply to collect information that should have been recorded.

Photographic Evidence Where appropriate, photographs should include

• Appliance.
• Data badge.
• Flue.
• Condensate.
• Gas pipework.
• Relevant components.
• Existing defects.
• Failed parts.
• Unsafe situations.
• Completed repairs or installation work.

Essential Qualifications & Experience Candidates should have

• Current Gas Safe qualifications appropriate to the role.
• Relevant domestic ACS qualifications.
• Proven boiler breakdown experience.
• Excellent diagnostic and fault-finding ability.
• Boiler servicing experience.
• Boiler installation experience.
• Strong central heating knowledge.
• Combustion analyser experience.
• Heating controls knowledge.
• Basic electrical fault-finding ability.
• Ability to use a multimeter correctly.
• Ability to understand wiring diagrams.
• Ability to use manufacturer technical information and fault codes.
• Full UK driving licence.
• Ability to work independently.
• Good customer communication skills.
• Ability to use a smartphone or tablet for job reporting.

Desirable Experience Additional experience or qualifications in the following would be advantageous:

• Commercial gas.
• G3 Unvented Hot Water.
• Manufacturer training.
• LPG.
• Electrical fault finding.
• Smart heating controls.
• Manufacturer or warranty repair work.
• Home-emergency or insurance breakdown work.

Experience across manufacturers such as

Vaillant, Worcester Bosch, Viessmann, Glow-worm, Ideal, Baxi, Potterton, Main, Alpha and Intergas would be particularly useful.
The Engineer We Want We are particularly interested in someone who is a genuine boiler fault-finding engineer .

You should be able to arrive at a breakdown, assess the appliance and heating system methodically and determine what is actually causing the problem.

You should

• Diagnose before replacing parts.
• Think logically.
• Understand complete heating systems.
• Use diagnostic equipment correctly.
• Interpret wiring diagrams and technical manuals.
• Recognise when one fault may be causing another.
• Know when further investigation is required.
• Understand the limits of your competence.
• Take responsibility for the quality of your work.
• Provide clear information to the office.

We are not looking for a parts changer.

Professional Standards You will be expected to

• Represent FIRST Plumbing & Heating-UK Ltd professionally.
• Take pride in your workmanship.
• Work safely and responsibly.
• Follow company procedures.
• Communicate with the office throughout the working day.
• Report mistakes or problems promptly.
• Look after company vehicles, tools and equipment.
• Maintain appropriate van stock.
• Avoid unnecessary material wastage.
• Report complaints or potential complaints promptly.
• Respect confidential customer and company information.
• Performance Performance will be based on the overall quality of your work, including:
• Accurate first-time diagnosis.
• First-time fix where reasonably achievable.
• Quality of repairs.
• Quality of installations.
• Repeat visits and recalls.
• Customer feedback.
• Accuracy of job reports.
• Quality of photographs.
• Correct parts identification.
• Productivity.
• Attendance and punctuality.
• Gas-safety compliance.
• Communication with customers and the office.

What We Offer Subject to the agreed employment package

• Full-time employment.
• Company vehicle.
• Fuel arrangements.
• Company uniform.
• Job-management system access.
• Technical and manufacturer training.
• Opportunities to gain additional qualifications.
• Varied breakdown, servicing and installation work.
• Opportunities for career progression.

Salary, working hours, overtime, call-out arrangements, holiday entitlement, pension and other employment terms will be confirmed as part of the employment offer.

In Short We want an experienced

Gas Safe boiler engineer who can genuinely diagnose faults and also install boilers to a high standard .

If you are confident with boiler breakdowns, understand heating systems, take pride in your installations and believe in fixing the cause rather than simply changing parts, we would like to hear from you.

Diagnose correctly. Repair safely. Install properly. Look after the customer.