Test Technician - Engineering & Manufacturing - London - £40k to £50k (Relocation Support)
Location: London
Employment Type: Full-time
Working Arrangement: On-site
Relocation Support
About the Opportunity
We are working with an innovative engineering and manufacturing business specialising in the development and production of advanced industrial equipment and technologies.
As the business continues to expand its manufacturing and engineering capabilities, we are looking for an experienced Test Technician to support the testing, inspection and validation of complex electromechanical systems.
This is a hands‑on opportunity for someone who enjoys working with technically challenging equipment, solving engineering problems and ensuring manufactured products meet the highest standards of quality, performance and safety.
The successful candidate will play an important role in developing and executing testing procedures, identifying technical issues and working closely with engineering, manufacturing and quality teams to ensure equipment is ready for operational use.
Key Responsibilities
Testing & Validation of Electromechanical Systems
- Carry out comprehensive testing of complex electromechanical equipment and industrial systems.
- Perform mechanical, electrical and pressure system testing following manufacturing and assembly.
- Set up and operate specialist testing equipment, tools and test rigs.
- Execute testing procedures in accordance with engineering specifications, quality standards and established processes.
- Accurately record, document and report test results, ensuring full traceability.
- Identify faults, performance issues and non-conformances during testing.
- Work collaboratively with engineering, assembly and quality teams to investigate and resolve technical issues.
- Support the development and improvement of testing procedures to ensure efficient and consistent product validation.
- Ensure testing activities are completed accurately and within required production timescales.
Research, Development & Prototype Testing
- Support the assembly, setup and testing of prototype equipment and development systems.
- Assist engineering teams with testing activities during product development and design validation.
- Work with a variety of test equipment and methodologies as technical requirements evolve.
- Provide practical feedback to engineers regarding equipment performance, test results and potential design improvements.
- Contribute to the introduction of new products and systems into manufacturing.
- Support the development of repeatable and scalable testing processes.
Product Lifecycle & Engineering Support
- Provide technical input into testing requirements throughout the product development and manufacturing lifecycle.
- Collaborate with engineering teams during the design phase to ensure products can be effectively tested and validated.
- Assist with the development and commissioning of test rigs and specialist testing equipment.
- Support production testing, final inspection and equipment readiness assessments.
- Contribute to troubleshooting and fault-finding activities on completed assemblies.
- Provide technical support for equipment testing and validation where required.
- Identify opportunities to improve testing efficiency, product reliability and manufacturing quality.
Quality Assurance & Documentation
- Maintain accurate records of testing activities, results and identified issues.
- Ensure equipment is tested against defined acceptance criteria and technical specifications.
- Support quality assurance processes and continuous improvement initiatives.
- Assist with investigating test failures and implementing corrective actions.
- Work closely with manufacturing and quality teams to maintain consistent testing standards.
- Ensure relevant documentation is completed accurately and in a timely manner.
Health & Safety
- Follow established health and safety procedures during all testing activities.
- Conduct testing of electrical, mechanical and pressure equipment in accordance with appropriate safety requirements.
- Identify potential hazards and ensure suitable precautions and control measures are implemented.
- Maintain a safe, clean and organised testing environment.
- Report equipment defects, unsafe conditions and potential safety concerns.
- Support compliance with relevant industry standards, regulations and internal procedures.
- 2–5 years' experience in industrial testing, equipment validation, manufacturing or a similar engineering environment.
- Practical experience testing industrial machinery, electromechanical assemblies or complex engineered equipment.
- Strong understanding of mechanical and electrical systems and their interaction.
- Experience conducting functional testing, performance verification and fault diagnosis.
- Ability to use a variety of testing equipment, measuring instruments and diagnostic tools.
- Experience interpreting engineering drawings, technical specifications and testing documentation.
- Familiarity with developing, following and improving testing procedures.
- Experience accurately recording test results and maintaining quality documentation.
- Ability to identify technical faults, investigate issues and work towards practical solutions.
- Understanding of safe working practices when testing mechanical, electrical and pressure‑related equipment.
- Strong attention to detail and commitment to maintaining high quality standards.
- Ability to work independently and collaboratively within a multidisciplinary engineering or manufacturing team.
- Experience testing pressure systems, industrial process equipment or specialist machinery.
- Knowledge of pressure testing, leak testing and associated safety procedures.
- Experience working with electrical testing equipment, sensors, instrumentation and control systems.
- Familiarity with commissioning and validating complex industrial assemblies.
- Experience supporting prototype development, R&D testing or new product introduction.
- Understanding of manufacturing quality assurance processes and inspection requirements.
- Experience contributing to test rig design, development or improvement.
- Familiarity with root cause analysis, fault investigation and corrective action processes.
- Experience working in a fast‑paced, low‑volume or specialist manufacturing environment.
- Ability to provide practical input into design‑for‑testability and manufacturing improvements.
The Ideal Candidate
We are looking for a practical, technically capable Test Technician who takes pride in ensuring equipment operates safely, reliably and to the required specification.
You will be comfortable working in a hands‑on engineering environment where attention to detail, technical problem‑solving and collaboration are essential.
The ideal candidate will be methodical, safety‑conscious and confident working with a range of mechanical, electrical and industrial systems.
You will enjoy investigating technical challenges, improving testing processes and contributing to the successful delivery of high‑quality engineered products.
- Full‑time opportunity
- On‑site role in South London
- Equity or share option opportunities
- Relocation assistance and additional location‑based financial support
- Generous and flexible annual leave arrangements
- Opportunity to work on technically challenging engineering and manufacturing projects
- Career development opportunities within a growing engineering business
#J-18808-Ljbffr
Test Technician - Engineering & Manufacturing - London - £40k to £50k (Relocation Support) employer: EVEREC
Join a forward-thinking company in Whitstable, Kent, where as a Senior Electrical Project Manager, you'll play a pivotal role in shaping the future of EV charging infrastructure. With a strong emphasis on employee growth and collaboration, you will benefit from a supportive work culture, competitive salary, and an electric company car, all while contributing to a long-term contract that offers job security and the opportunity to lead a new division within a dynamic team.
StudySmarter Expert Advice🤫
We think this is how you could land Test Technician - Engineering & Manufacturing - London - £40k to £50k (Relocation Support)
✨Join Local Manufacturing Groups
Getting involved in local manufacturing groups or associations can seriously boost your visibility. These groups often have insider info on job openings and networking events, plus they help you connect with like-minded folks in the industry. Check out what's happening in your area!
✨Show Off Your Skills in Practical Spaces
Consider participating in workshops or open days at manufacturing companies. It's a great way to show off your hands-on skills in a real-world environment and can sometimes lead to job offers right on the spot. Keep an eye on announcements from local manufacturers for these opportunities!
✨Leverage the Power of Internships
While you're looking for full-time positions, don't underestimate the power of internships! Even if you don't see a direct role, securing an internship at a company can open doors to future jobs. Many manufacturing firms prefer to hire from their intern pool, so it's definitely worth considering.
✨Apply Directly Through Company Websites
When you find a role at a company you love, like EVEREC, apply directly on their website. This way, you’re more likely to be noticed by the hiring team. Plus, showing that you took the time to seek out their application process highlights your genuine interest in the firm!
Some tips for your application 🫡
Showcase Your Technical Skills:In the manufacturing-production sector, it's crucial to highlight your technical skills and experience. Make sure your CV features any relevant qualifications, such as certifications in machinery operation or production management, and don’t forget about any specific systems or software you’re familiar with. This can really set you apart!
Emphasise Teamwork and Communication:Working in manufacturing often means being part of a larger team. Highlight your experience in collaborative projects or environments where communication was key. Maybe you have experience with lean manufacturing principles? Talk about how you worked with your team to improve productivity and maintain quality.
Tailor Your Cover Letter to the Company:Don’t just recycle an old cover letter! Take the time to tailor your cover letter to EVEREC specifically. Mention what excites you about their production processes or products, and how your previous experiences can contribute to their goals. We want to see your enthusiasm for the role!
Use Concrete Examples of Your Achievements:When detailing your work experience, include measurable achievements that can demonstrate your impact. Whether it’s improving efficiency by a certain percentage or successfully leading a project, these specifics can make a huge difference. Numbers speak volumes in the manufacturing world!
How to prepare for a job interview at EVEREC
✨Know Your Manufacturing Processes
Before you walk into the interview with EVEREC, brush up on the specific manufacturing processes relevant to the role. Understanding lean manufacturing principles or quality control techniques could give you a solid edge to discuss how you’d fit into their operations.
✨Technical Questions Are Key
Be prepared for technical questions around machinery, production scheduling, or materials handling. Make sure you can confidently explain how you've dealt with these in past experiences or internships. Knowing industry-specific software could also be a big plus!
✨Showcase Your Problem-Solving Skills
Manufacturing environments often focus on continuous improvement. Be ready to discuss specific instances where you’ve solved a production issue or implemented a process improvement. It’s all about demonstrating your analytical thinking and hands-on approach.
✨Align Your Values with Quality and Safety
In a full-time role, companies like EVEREC value commitment to quality and safety. Be prepared to discuss how you prioritise these factors in your work. It’s about showing that you’re not just looking for a job, but that you genuinely care about contributing positively to their production environment.
