At a Glance
- Tasks: Operate and inspect machines for manufacturing aero engine components.
- Company: Join MB Aerospace, a leader in aerospace engineering solutions.
- Benefits: Gain hands-on experience with training and flexible shifts.
- Other info: Opportunities for growth and learning in a dynamic environment.
- Why this job: Be part of an innovative team shaping the future of aerospace.
- Qualifications: No experience needed; passion for engineering is key!
The predicted salary is between 30000 - 40000 € per year.
Location: Newton Abbot (Barnes Aerospace), Shaldon Road, Newton Abbot, TQ12 4SQ, GBR
About Us
MB Aerospace Newton Abbot Ltd, a Barnes Aerospace Company, is an international group providing complex engineering solutions to some of the key names in the Aerospace and Defence market. Operating from sites close to our key customers in North America, Asia and Europe, the MB Aerospace group provides advanced technological solutions to the Aerospace and Defence industry, leveraging an in-depth knowledge of fabrications, machining and the global supply chain to support complex aero-engine component manufacture and repair.
The Role
To be trained to operate and inspect work from 3 or more machines for the manufacture of aero engine components.
Key Responsibilities
- Clean and load components in fixture using correct datum faces
- When operating machines carry out work in line with appropriate standard operating procedures (SOPs) and company procedures
- When the machining cycle is complete, remove, clean, and inspect the part
- Maintain correct working order of the machine, by making appropriate adjustments to tooling and coolant flow as and when required
- Liaise with Inspection to check first off before starting full batch run
- Use appropriate hand tools to deburr work
- Visually Inspect and measure components to ensure compliance with specification
- Use optical, manual, electronic, digital gauges and tooling as supplied
- Calibrate and operate micro-PCRs (programmed measurement instruments) – in accordance with planning requirements
- Carry out inspections on other operators’ work – especially those not qualified to inspect their own work e.g., operators undergoing training
- Complete manual and PC based production records, recording components completed and identifying those not conforming to specification on "non-conformance notes". Stamp "OK" or enter into the paperless manufacturing centre (PLMC)
- Segregate non-conforming parts. Take completed batch to next operation
- Assist with training and mentoring of new team members, in line with individual competence
- Maintain work area in a clean and safe condition, report any problems to cell supervision, cell manufacturing support operative (MSO) and/or Maintenance
- Maintain machines in a running condition by changing consumables as required. e.g., cutters, grinding wheels and electrodes
- Hand finish components to planning requirements
- Demonstrate and promote in-cell standardisation by maintaining: health & safety, 6S, SOPs, daily check sheets, front line asset care, machine first off procedures and date calibration checks
- Book off work in accordance with all production and quality requirements.
Job Requirements
- Meeting daily production targets whilst maintaining quality standards
- Ability to work a range of shifts
- NVQ 1 - Mechanical Engineering (desired not essential)
- Relevant safety certificates e.g., grinding wheel certification (desired not essential)
- Manual handling training may be appropriate in some areas
- Ability to use measuring instruments e.g., vernier, gauges, micrometres, and electronic gauges (training will be provided)
- 6 months experience preferable but not essential
- Knowledge of cutter characteristics and tool life advantageous
- Ability to follow company planning and procedures and recognize abbreviations/symbols
Key Behaviours
- Has a passion for the engineering and the manufacturing sector
- Always looks to learn new skills
- Has flexibility to work a range of different shifts
- Embodies the Barnes Group Company values of Integrity, Respect, Collaboration, Empowerment & Determination
The duties of the post may change from time to time without altering their general character or the level of responsibility entailed.
Shift Schedule
The main full time shift in which we run at Newton Abbot is:
- Days – 6:30am - 2:30pm Monday to Thursday, 6:30 - 12:30 Friday (for 4 weeks)
- Mids – 2:00pm - 10:00pm Monday to Thursday, 12:00pm - 6:00pm Friday (for 4 weeks)
- Nights – 9:30pm - 7:00am Monday to Thursday (for 4 weeks)
Jobholder Responsibilities
- Be aware of the Company’s aims, organisational values and behaviours and their impact on this post.
- Carry out the duties of the post in accordance with the Company’s Equality & Inclusivity in Employment Policy.
- Carry out all duties and responsibilities with reasonable care for the health and safety of you and any other person who may be affected by your acts or omissions at work and to co-operate fully with the Company in health and safety matters.
- To comply with the UK GDPR and Data Protection Act.
- The above-mentioned duties are neither exclusive nor exhaustive and the post holder may be called upon to carry out such other appropriate duties as may be required within the grading level of the post and the competence of the post holder.
MB Aerospace Newton Abbot Ltd, A Barnes Aerospace Company, is an Equal Opportunity Employer.
MB Aerospace Newton Abbot Ltd, a Barnes Aerospace Company, is a subcontractor to the United States Government and provides defence services involving technical data and products governed by the Arms Export Control Act and the International Traffic in Arms Regulations (ITAR), 22 C.F.R. parts 120 - 130 and the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R. parts 730 – 774 ("Export Laws"). All candidates are subject to review and governance under such Export Laws and any offer of employment may be subject to additional considerations and/or conditions.
Operator Inspector employer: Barnes Aerospace
MB Aerospace Newton Abbot Ltd offers a dynamic work environment where employees are encouraged to grow and develop their skills in the aerospace and defence sector. With a strong emphasis on collaboration, integrity, and empowerment, the company provides comprehensive training opportunities and a supportive culture that values safety and quality. Located in Newton Abbot, employees benefit from a strategic position close to key customers, fostering a sense of purpose and connection to the industry.
StudySmarter Expert Advice🤫
We think this is how you could land Operator Inspector
✨Tip Number 1
Get to know the company! Research MB Aerospace and understand their values and what they do. This will help you tailor your conversations during interviews and show that you're genuinely interested in being part of the team.
✨Tip Number 2
Practice makes perfect! Before your interview, run through common questions and think about how your skills match the Operator Inspector role. We want you to feel confident and ready to impress!
✨Tip Number 3
Network like a pro! Connect with current employees on LinkedIn or attend industry events. This can give you insider info and might even lead to a referral, which is always a bonus!
✨Tip Number 4
Apply through our website! It’s the best way to ensure your application gets seen. Plus, it shows you’re proactive and serious about joining the MB Aerospace family.
We think you need these skills to ace Operator Inspector
Some tips for your application 🫡
Tailor Your Application:Make sure to customise your CV and cover letter for the Operator Inspector role. Highlight any relevant experience or skills that match the job description, like your ability to operate machines or inspect components.
Show Your Passion:Let us see your enthusiasm for engineering and manufacturing! Share any projects or experiences that demonstrate your interest in the field, as we love candidates who are eager to learn and grow.
Be Clear and Concise:When writing your application, keep it straightforward. Use clear language and bullet points where possible to make it easy for us to see your qualifications and experience at a glance.
Apply Through Our Website:We encourage you to submit your application through our website. It’s the best way for us to receive your details and ensures you’re considered for the role. Plus, it’s super easy!
How to prepare for a job interview at Barnes Aerospace
✨Know Your Machines
Familiarise yourself with the types of machines you'll be operating. Understand their functions and the standard operating procedures (SOPs) associated with them. This will show your potential employer that you're proactive and ready to hit the ground running.
✨Brush Up on Measuring Instruments
Since you'll be using various measuring instruments like verniers and micrometres, it’s a good idea to practice using these tools before your interview. Being able to demonstrate your knowledge and comfort with these instruments can set you apart from other candidates.
✨Show Your Passion for Engineering
During the interview, express your enthusiasm for the engineering and manufacturing sector. Share any relevant experiences or projects that highlight your passion and willingness to learn new skills. Employers love candidates who are genuinely interested in the field!
✨Understand Company Values
Research MB Aerospace's values of Integrity, Respect, Collaboration, Empowerment, and Determination. Be prepared to discuss how you embody these values in your work. This will demonstrate that you’re not just a fit for the role, but also for the company culture.
