Find a job 
Featured Companies 
Featured Universities 
For Companies At a Glance
- Tasks: Ensure top-notch quality in fluid-flow technology products and lead continuous improvement initiatives.
- Company: Join a global leader in fluid technology with a mission to engineer the future.
- Benefits: Opportunity for permanent role, dynamic work environment, and professional growth.
- Other info: Exciting career path with hands-on experience and travel opportunities.
- Why this job: Be part of a creative community making a real impact on quality and innovation.
- Qualifications: Experience in mechanical/electromechanical fabrication and strong communication skills.
The predicted salary is between 35000 - 45000 £ per year.
Position: 6 Months FTC (With the Opportunity to go Permanent)
Imagine working at the forefront of innovation in fluid-flow technology, with over 1400 colleagues across the globe, and contributing to a legacy of excellence that spans eight manufacturing facilities on four continents. Armstrong Fluid Technology is more than just a leader in our industry; we are a community of the brightest and most creative minds, driven by a shared mission to engineer the future and safeguard our planet. As a member of our team, you'll dive into an environment that encourages learning and boundary-pushing every day. You'll be part of an agile and dynamic workplace where today's solutions are built for tomorrow's challenges.
Overview
Due to the continued growth we are now recruiting a further Quality Engineer. In this role, as a Quality Engineer, you will be responsible for developing and maintaining a high level of quality for products delivered by our plant. The Quality Engineer is expected to operate within a framework of procedures and specific targets in pursuit of overall department goals and objectives. Primarily based at the Droitwich site, however, will require some travel for inspections at Supplier sites.
Key Responsibilities
- Oversee and coordinate incoming, in-process, and final inspection activities to ensure adherence to quality standards.
- Optimize quality control efficiency and effectiveness by implementing sound quality sampling methods.
- Dimensional checks against GA/isometrics, bolt torque, gasket type, flow direction, and tagging.
- Oversee NDT coordination (VT, PT/MT, RT/UT as applicable); review reports and close out findings.
Standards, Compliance & Documentation
- Ensure builds conform to specifications, P&IDs, isometrics, and applicable codes (e.g., ISO 9001 QMS, PED/UKCA where applicable, ASME/EN pipework standards, electrical standards).
- Maintain device/heat-number traceability; control calibrated instruments and welding consumables per procedure.
- Create/own ITPs, quality plans, inspection checklists, and weld maps; manage NCRs, concessions, and corrective actions.
Problem Solving & Continuous Improvement
- Lead the NCR Management System (5 Whys, Ishikawa) with measurable effectiveness checks in place.
- Ensure that all SPC defects /first-pass yield/defect Pareto to target chronic issues (e.g., gasket seating, torque scatter, cable terminations).
- Feed manufacturability improvements back to Design (Poka-Yoke, standardization of valves/instrumentation, clearer isos/BOMs).
- Coach welders/fitters/assembly techs on inspection criteria, pressure-test safety, cleanliness standards, and E&I test methods.
- Participate in daily stand-ups and readiness reviews; provide clear quality status and risk visibility to PMs and Production.
- Host client/third-party inspectors; manage hold/witness points and close comments professionally.
Skills & Requirements
- Solid, hands-on experience in mechanical/electromechanical fabrication or modular plant construction.
- Can read/interpret P&IDs, isometrics, GA drawings, electrical schematics, and data sheets.
- Competent with precision measurement, pressure testing rigs, torquing methods, and basic electrical test equipment.
- Familiar with welding quality (WPS/PQR/WPQR), material traceability, and typical NDT methods.
- Working knowledge of ISO 9001 QMS and project documentation controls.
- Strong communicator who’s comfortable on the shop floor and with clients/inspectors.
Preferred Qualifications
- Degree in Mechanical/Electrical/Manufacturing Engineering or similar.
- Six Sigma (Green Belt a plus); prior experience with SPC and CAPA.
- Experience with PED/UKCA, ASME B31.x/EN piping codes, pressure testing standards, ATEX considerations (where relevant), and BMS/I/O FATs.
- E&I familiarity: continuity/IR testing, loop checks, VFD setup basics.
KPIs / Success Measures
- First pass yield on FAT, NCR rate & closure lead time, punch-list burn-down before ship date.
- On-time data book delivery, client/TP inspection acceptance at first presentation.
- Leak-free pressure tests, reduction in rework hours, effectiveness of CAPA (sustained).
Tools & Systems (example stack)
- QMS: ISO 9001 workflows, NCR/CAPA system (e.g., EtQ/Intelex/Jira).
- Drawings & Data: Autodesk/Inventor/Plant 3D, Navisworks, or similar; Office/365.
- Test: Calibrated pressure gauges, recorders/data-loggers, torque tools, multi-meters, insulation testers.
Quality Engineer employer: Armstrong Fluid Technologies
Contact Detail:
Armstrong Fluid Technologies Recruiting Team
StudySmarter Expert Advice 🤫
We think this is how you could land Quality Engineer
✨Tip Number 1
Network like a pro! Reach out to your connections in the industry, attend relevant events, and don’t be shy about asking for introductions. We all know that sometimes it’s not just what you know, but who you know that can land you that Quality Engineer role.
✨Tip Number 2
Prepare for interviews by researching the company and its products. Understand their quality standards and challenges they face in fluid-flow technology. We want you to show them you’re not just another candidate, but someone who’s genuinely interested in contributing to their mission.
✨Tip Number 3
Practice your problem-solving skills! Be ready to discuss how you’ve tackled quality issues in the past. Use examples that highlight your hands-on experience with mechanical/electromechanical fabrication. We want to see that you can think on your feet and bring solutions to the table.
✨Tip Number 4
Don’t forget to apply through our website! It’s the best way to ensure your application gets noticed. Plus, we love seeing candidates who take the initiative to engage directly with us. Let’s get you on board as a Quality Engineer!
We think you need these skills to ace Quality Engineer
Some tips for your application 🫡
Tailor Your CV: Make sure your CV is tailored to the Quality Engineer role. Highlight relevant experience and skills that match the job description, like your hands-on experience in mechanical fabrication or knowledge of ISO 9001 QMS.
Craft a Compelling Cover Letter: Your cover letter is your chance to shine! Use it to explain why you're passionate about quality engineering and how you can contribute to our mission at Armstrong Fluid Technology. Be genuine and let your personality come through.
Showcase Problem-Solving Skills: In your application, don’t forget to mention specific examples of how you've tackled challenges in previous roles. We love candidates who can demonstrate their problem-solving abilities, especially in quality control and continuous improvement.
Apply Through Our Website: We encourage you to apply directly through our website. It’s the best way for us to receive your application and ensures you’re considered for the role. Plus, it shows you’re keen on joining our community!
How to prepare for a job interview at Armstrong Fluid Technologies
✨Know Your Quality Standards
Familiarise yourself with ISO 9001 QMS and other relevant standards mentioned in the job description. Be ready to discuss how you've applied these standards in your previous roles, especially in quality control and inspection processes.
✨Showcase Problem-Solving Skills
Prepare examples of how you've tackled quality issues in the past. Use the STAR method (Situation, Task, Action, Result) to structure your answers, particularly focusing on your experience with NCR management and continuous improvement techniques like 5 Whys or Ishikawa diagrams.
✨Demonstrate Technical Proficiency
Brush up on your knowledge of P&IDs, isometrics, and GA drawings. Be prepared to explain how you interpret these documents and apply them in a practical setting, as well as your experience with precision measurement and testing methods.
✨Communicate Effectively
Since the role involves liaising with clients and inspectors, practice articulating your thoughts clearly and confidently. Think about how you can convey complex technical information in an understandable way, and be ready to discuss your experience working on the shop floor.